EnGenius Fit L2 Plus Managed 24-Port Gigabit PoE+ Switch | 802.3at/af PoE+ ready | 410W Budget | 4 SFP Uplink Ports | 56 Gbps switching capacity | [EWS7928FP-FIT] 410W, 24 Port

This switch is a great device as are most engenius products. You probably don't need a fit managed system as engenius cloud is so easy to configure. All fit devices are nearly identical to their cloud only counterparts sans firmware. All fit devices are considerably more expensive. In the latest residential system I did, I used the 400 watt version of the 24 switch. With over 2000ft of cable and 15 access points, including 3 outdoor units in a particularly challenging environment, I'm only using 95 watts out of the 400 watts available. Plenty of room for heated cameras etc down the line. From my experience, sometimes the cloud versions are actually easier. However, fit devices don't require ongoing licensing or monthly/yearly fees. Side notes: In a home environment, try to run in mesh mode with a wired backhaul only. You will never achieve higher than 850Mbps on any given access point. For the most part leave the power settings alone, only reducing the power of certain devices to aid in handoffs to more desirable devices. Client tracking and handoffs don't work well with lower security schemes. Lower security settings severely reduce speeds. Double check that the switch changed the default password to your chosen password system wide to all access points. This requires proper management vlan settings. Hope this helps.