AVerMedia BA311 Live Streamer Arm, Fully Adjustable Boom Arm and Microphone Stand Suitable for 1/4 Inch or 5/8 Inch Mounting Options, for Content Creating, Podcasting and Streaming

I love the flexibility of this arm which is essential for my very particular home office setup and i'm now getting rid of my Rode PSA1+ as that one is a pain in the ass when it comes to adjusting where the mic is screwed in whenever I need to switch up the orientation of the mic. with the Rode PSA1+ you have loosen it and then adjust position and hold it while tightening it up again, whereas with the Avermedia arm, you can simply rotate it. Additionally, the built-in rotating screw mechanism is such a simple but genius design which makes it way easier to screw on a mic there. However there are some important things to consider. Go read the review by Tommy Thao to get all the details but to recap: 1) The cable management system is not designed for cables thicker than 6mm which sucks if you have thicker XLR cables. 2) The arm is weak. Im using a Shure MV7 which is a lightweight mic but I still found that I had to tighten the joint screws a little bit. Heavier mics will definitely not hold in place without tightening joint screws to the max and even then, it might not be enough depending on the weight of the mic/accessories. 3) Joint movement is tricky. I absolutely love the flexibility of this arm, however it is a bit tricky to get used to. You'll have to play with it a bit to see how it works but this wasn't a huge issue for me, I was able to figure it out for my setup fairly quickly. YMMV tho. 4) PRICE. This is where I think is the biggest problem with this arm. Its waaaaay to overpriced in its current state; this arm should be around $130. If it didnt have the issues that myself and others have pointed out then definitely would be worth the asking price. It needs to be beefed up so it can handle heavier mics, take thicker XLR cables and if they could add a built-in extension tube so the mic can be placed further from the arm, kind of like a mic stand boom arm that can extend out, I would gladly pay the asking price. The reason I personally would like boom arm extension is that the way my desks are set up, the arm gets in the way of my monitor on my right hand side so I've added my own extension tube so I can place the arm out of my line of sight but still have the mic right in front of me with out blocking my view. Adding my own extension tube was a quick fix but its obviously not as secure as a built-in one would be. Also, since this adds weight due to being off center and whatnot, they would definitely need to beef up the joint tension system. So overall, I love this arm because it works for my very particular setup and light weight mic, but I do believe it should be less expensive. Here's hoping theres a version 2 of this arm that address all of its short comings.

As soon as you touch this mic arm you know it is going to be sturdy and great. The joints are strong and retain tension, the multiple set up methods are versatile and perfect, and the size of the arm is bigger than anticipated. If you want something that gives you a lot of choices for arrangement and placement between over monitor, under monitor, and low profile, then this is the only mic arm out there you should even consider. This thing is an absolute beast and I love it. It did take a bit to get it articulated the way I wanted because the hinges are very tight (which is a good thing) and when I first was trying to rotate it to go low profile I thought I was going to break it haha, but I was very wrong, I don't think I could break this if I tried. I would suggest looking at the set up manual's image to make sure you have it rotating the appropriate direction to achieve the angles and positioning you want. Something I should have done first instead of saying "I got this", spoiler alert... he did not "got this" I couldn't give this 10 starts out of 5, but I would have. Amazing.

I'm using this with an Earthworks Icon Pro mic (about 2.5lbs) and the only issue I have with it is the same as the other review where it talks about weight support. You have to tighten it quite a bit to support over 2lbs. It's a bit heavier than a Rode Podmic which I'm thinking about getting another one these for use with my other rig. The middle not having a swivel isn't a big deal for me with my setup but I could see where it would be nice to have if you have a bit less distance from the mount to where you want the mic than I have. That being said, it's overall great for a low profile arm. Make sure you have an even mount surface as like most booms that support that much weight fairly far out, it will drift some. Since most swivels do that I'm not counting it against the design and it can be dealt with in various ways. The desk mount itself is sturdy though you may need to tighten it a couple times during the first week of use as the foam settles. It is a little pricier than I would have liked but the build quality is nice and the adjustments are easy. The track for the cable management clips in tight and should fit most standard size XLR cables. Very happy with it... :)