In-win Chopin Max Mini-itx Tower Pc Computer Case W/200w Psu - Titanium Gray

Needed a more travel friendly case for my 5600G PC, and after some research settled here. I found the case quite easy to work in, everything fit without difficulty. Quality seems good throughout, and it's a nice looking case. I did need to be a little thoughtful when routing cables, as there is very little room for cable management.. but everything did fit. The front panel cables are a bit long, I suppose that's better than the alternative! I did notice it's a little noisy when under heavy loads, but such a small case can't be expected to contain the noise of a CPU fan running at high RPM. I can't hear the power supply fan at all in my copy, something others had complained about. Just three things to watch out for. First, as I mentioned cable routing is important to consider. Take your time making those connections, and be prepared to reroute as necessary. I found it best to run the 12V CPU power first, lay the 24 pin connector in place, then route the drive cable through the cutout, THEN seat the 24 pin connector. SSD data cable next, I switched to one of the thin cables to make routing a bit easier. Then FP audio, FP power cable, then the USB 3.0. My board doesn't have a USB C header, so I just tucked that in last. Manage each cable as you connect them rather than waiting to the end and trying to deal with it that way. Second, the motherboard tray covers quite a bit of the back of the motherboard. If you have a rear mounted nvme you will not have space for a heat sync unless it fits the small cutout you can see in the photo. Third, rear mounted SSDs are retained by a flexible clip that can interfere with the cooler mount in some instances. I made it work, but removing it would be tight. My only regret is waiting so long to switch to this case. If you aren't planning to use a GPU, and don't use a high TDP CPU, I can't think of a better option. Longevity of the power supply is a concern, mostly because it's proprietary, but there are options if it fails.

This case cannot be found in my country (RO) and I had to order from Amazon. I made a Ryzen 7 8700G build with this and is great so far.

The best feature for this updated version of the Chopin is the added height to allow a stock AMD Wraith Stealth cooler to fit without any modifications. Supposedly, the updated PSU is meant to be quieter, but I didn't have the original unit on hand to compare it to. This is my personal favorite case and power supply combo for small ITX builds that rely on integrated graphics. There are two others from LIAN LI with similar internals- one of which is able to use an 80mm fan for exhaust- but this one fits my needs pretty much perfectly.

Excelente súper compacto, es exactamente lo que necesitaba por cuestión de espacio

コード類が長かったのでカットし、ATX24+8電源やピンコネクターごと交換。 エアーフローが良くなるよう体積を確保し、見た目もスッキリと。 CPUクーラーの高さが54mmまで対応になったので、標準ファンでも余裕で収まります。 NVMe M.2 SSDをマザーボードの表裏に１枚ずつ装着、裏側に穴が開いているので便利です。 PCI-E 16xスロットにも１枚、計３枚を装着。SATAは使用せず。 スペック MB:BIOSTAR[B760T-SILVER]、CPU:Core i5 13500、NVMe M.2 SSD １TB×３（起動ドライブ×２､データ用×１）